PERSONAL STATEMENT
EXAMPLES
My statements
Home » Subject areas » Agriculture, horticulture and forestry » Agricultural engineering and biotechnology » Agricultural engineering personal statement example

Agricultural engineering personal statement example

PSE example
  • Reading time: 4 minutes
  • Price: Free download
  • Published: 17th September 2026
  • Word count: 1078 words
  • File format: Text

Why do you want to study this course or subject?

The thing that pulled me towards agricultural engineering was a conversation I overheard at the counter of the farm supplies merchant where I work on Saturdays. A customer was explaining that his grain had come out of store above the moisture he expected, and that he was not sure whether the problem was the fan, the ducting or the way the heap had been filled. He was not short of practical skill; he was short of measurement. That stuck with me, because it is exactly the sort of problem that sits between physics and farming rather than neatly inside either.

Since then I have started noticing how much of agriculture is an engineering question in disguise. Soil compaction is about tyre pressure and contact area. Slurry storage is about volumes, gas and containment. Even the timing of field operations is partly a materials problem, because a wet soil behaves differently under load than a dry one. In Physics I enjoy the parts of the course where energy and forces have to be traced through a real system, and in Geography I have found soils and hydrology far more interesting than I expected, particularly the way water moves through pores and how quickly structure can be lost.

I want to study this at degree level rather than pick it up on the job because I would like to be able to size a fan, model a heat balance and interpret a soil test, not only recognise that something is wrong. I am interested in the mechanisation side, including machinery design and control systems, and in the less glamorous infrastructure: driers, stores, ventilation, water supply. Food production has to become less energy-hungry and more careful with soil, and both of those depend on people who can measure what is actually happening in a shed or a field. I would like to work in machinery development or in advising on grain handling and storage, and I expect a degree with practical placements to be the honest route to that.

How have your qualifications and studies helped you to prepare?

I am studying Maths, Physics and Geography at a sixth-form college. Maths has been the most useful of the three for the way I think: mechanics gave me a language for forces and moments that I now use when looking at implements, and the statistics work has made me more careful about small samples, which matters when someone claims a treatment has improved a yield.

Physics has been my favourite subject for its practical content. The thermal physics unit, covering specific heat capacity and latent heat, was the point at which grain drying stopped being mysterious and became a calculation about the energy needed to evaporate water. Our required practicals also taught me to be honest about uncertainty; my results for the resistivity experiment were consistently a little high and working out that the contact resistance at the clips mattered was more instructive than getting a tidy answer.

In Geography I chose to focus my independent investigation on soil infiltration rates across three parts of a field margin, using a simple double-ring infiltrometer we built from tins. It was a small study and I was careful not to overstate it, but the difference between the trafficked headland and the ungrazed margin was large enough to be visible without statistics, and writing it up taught me how to structure a method so someone else could repeat it.

For my EPQ I wrote a report comparing on-floor and continuous-flow grain drying, covering airflow requirements, fuel use and the practical constraints of a mixed arable farm. I used engineering guidance and manufacturer data, and interviewed a store manager for half an hour. The hardest part was accepting that the answer depended on scale and harvest pattern rather than one system being better. I also attended a college evening class in welding basics last autumn, which has made me more confident around a workshop.

What else have you done to prepare outside of education, and why are these experiences useful?

I work most Saturdays and some holidays at an agricultural supplies merchant, on the till and out in the yard loading feed, fencing and drainage pipe. The job has taught me the vocabulary of the industry and a fair amount about what breaks. Customers describe faults in plain language and I have learned to ask useful follow-up questions before sending someone off with the wrong part. Handling deliveries and keeping the yard stock tidy has also made me reliable about small routines, because a mislabelled pallet causes somebody else a wasted journey.

At home I rebuilt a seized two-stroke strimmer that my neighbour was going to scrap. Stripping the carburettor, cleaning the jets and replacing the fuel lines and diaphragm took three weekends and a manual downloaded from a forum, and it runs now. More recently I set up a temperature and humidity logger using a cheap microcontroller and sensor, and left it recording in my grandad's garden shed for a fortnight to see how conditions swung overnight. Plotting the data in a spreadsheet showed condensation risk in the early hours that I had not expected. It is a modest project, but it is mine, and it has made me want to learn to do it properly.

I help at our allotment association, mainly with the shared water butts and the rota for the communal strimmer. Last spring two of us took on repairing the gate and the fence panel by the road after a storm. We measured up, priced the timber, checked with the committee and did the job over two Saturdays. Working with one other person on a clear task suited me; we disagreed about whether to replace the post or sleeve it, talked it through and went with sleeving because the concrete was sound. It has held so far.

Outside that I play in a local hockey team as a defender, which keeps me organised about turning up on time in bad weather, and I have started learning to drive so that farm and placement work is realistic. I am comfortable with early starts, dirty hands and being the least experienced person in the yard, which I think is a reasonable starting point for this degree.

This example has 5,891 characters across the three answers. Use it for ideas and structure. Your own UCAS answers must fit within 4,000 characters in total, including spaces.

Why this example works — strengths and ways to improve

This is a specific, grounded statement whose evidence comes from ordinary work and modest projects, and it reflects honestly on what each taught you. Its main problem is length: at 5,891 characters it far exceeds the 4,000 limit, so you need to cut selectively, prioritising the grain-storage thread and trimming peripheral activities rather than flattening everything equally.

Subject motivation

He was not short of practical skill; he was short of measurement.

Your opening works because the overheard grain-moisture problem leads to a genuine insight about measurement, not a vague passion claim. The examples of compaction and slurry show real understanding. The closing sentence about energy-hungry food production edges towards generic, so keep it brief.

Academic preparation

grain drying stopped being mysterious and became a calculation about the energy needed

You connect specific topics, latent heat, mechanics and statistics, to agricultural problems convincingly. The infiltrometer study and EPQ show independent work at a plausible sixth-form level. The welding evening class sits awkwardly here and could be dropped or moved to save space.

Evidence and reflection

accepting that the answer depended on scale and harvest pattern

Your reflection is a real strength: the resistivity error, the careful limits on the soil study and the EPQ conclusion each show what you learned rather than claiming skills. Keep the reflections but shorten the descriptions leading to them, since the insight matters more than the process detail.

Relevant experience

Plotting the data in a spreadsheet showed condensation risk in the early hours

The shed logger links neatly back to your grain-storage motivation, and the merchant job is used well for fault diagnosis. The allotment fence, hockey and driving add less. Select the strongest two or three experiences instead of listing every activity.

Credibility and voice

It is a modest project, but it is mine

Your voice is modest, practical and believable; you never claim professional authority, and phrases like this suit your stage. One caution: the merchant job also appears in the motivation answer, so avoid making it carry the same point twice.

Structure and format

No single quotation shows the issue: the draft totals 5,891 characters against a 4,000 limit. Each answer comfortably exceeds 350 characters, so you can cut heavily. The library's 3,500-character minimum should be reached through selective trimming, not padding. Remove the closing editorial note before submission.

What you’ve done well

  • Your grain storage and drying thread runs from the merchant counter through thermal physics and the EPQ to the shed logger, giving the statement real coherence.
  • You reflect honestly on limits and errors, such as the contact resistance and the small infiltration study, which reads as genuine scientific maturity.

How this draft could improve

  • Cut roughly 1,900 characters by dropping or compressing the welding class, hockey, driving and allotment fence detail, keeping the evidence most tied to engineering.
  • Trim the descriptive setup in the strimmer and EPQ paragraphs so each keeps its reflective conclusion in fewer words.
  • Replace the general closing line on food production in the first answer with a shorter, more specific statement of the problems you want to work on.