PERSONAL STATEMENT
EXAMPLES
My statements
Home » Subject areas » Chemical, materials and process engineering » Materials and manufacturing processes » Corrosion engineering postgraduate personal statement example

Corrosion engineering postgraduate personal statement example

PSE example
  • Reading time: 3 minutes
  • Price: Free download
  • Published: 17th September 2026
  • Word count: 606 words
  • File format: Text

Personal statement example

Most of what I now find interesting about corrosion I first met as a nuisance. In my job as a quality technician at a sheet-metal fabricator, a recurring complaint from one customer concerned rust bleeding from around fasteners on painted brackets used outdoors. Nothing dramatic was failing, but the pattern was consistent enough to be worth understanding: galvanised fasteners in contact with a painted mild steel plate, coating damage at the drilled hole, and an installation site near the coast. I wrote up the observations with photographs for our production manager, and we trialled a change of fastener coating and a touch-up procedure after drilling. The complaints reduced. I cannot claim the analysis was sophisticated, but it showed me that corrosion problems are usually a combination of material choice, geometry and environment rather than a single fault, and that I wanted to study them properly rather than guess.

My degree gave me the foundations for that. I took modules in physical metallurgy, electrochemistry and materials selection, and my final-year project compared the pitting behaviour of 304 and 316 stainless steel in sodium chloride solutions of different concentrations. I ran potentiodynamic polarisation scans and, where the equipment allowed, held samples at fixed potentials to look for metastable pitting current transients. The results were broadly as the literature would predict, with the molybdenum-containing grade showing a higher breakdown potential, but the value of the project for me was in the practical discipline: surface preparation that actually reproduced, careful handling of reference electrodes, and honest reporting of scatter between repeats. I learned to distinguish an interesting result from an artefact of a badly polished specimen, and I became more cautious about drawing conclusions from three samples.

I worked with one other student on the sample preparation and imaging stage, and we divided it so that she prepared and mounted specimens while I photographed and measured pit density on a grid. Agreeing a counting convention in advance mattered more than either of us expected; our first independent counts of the same image differed by nearly a third. Sorting that out taught me something about the difference between a measurement and an impression.

Outside work I volunteer with a canal restoration group, mainly needle-gunning and repainting lock gate ironwork and handrails. It is unglamorous, but it has been a useful education in coating systems as they exist in practice: incomplete surface preparation because the weather closed in, edges and bolt heads where film thickness is always thin, and repairs made over earlier repairs of unknown origin. Reading Pierre Roberge's Handbook of Corrosion Engineering alongside this work has helped me connect the site decisions we make to concepts such as differential aeration and coating permeability.

An MSc attracts me because my current knowledge is patchy. I understand basic electrochemical thermodynamics and kinetics, but I have little formal grounding in cathodic protection design, inhibitor selection, high-temperature oxidation or the standards and inspection regimes that govern asset integrity. I would particularly like to strengthen my modelling and data analysis, since much of my present work stops at description. For the dissertation I am drawn towards coating breakdown at edges and fastener details, partly because I have seen the problem repeatedly and partly because it seems tractable with laboratory exposure testing.

In the longer term I would like to work in asset integrity or materials selection, ideally for infrastructure or water industry clients, where decisions have to be justified over decades rather than warranty periods. I am comfortable with laboratory routine, careful record-keeping and explaining technical findings to people on the shop floor, and I expect all three to be useful on the course.

Why this example works — strengths and ways to improve

This is a strong, grounded taught-MSc statement. You move from a workplace nuisance to a degree project, volunteering and a clear dissertation interest, with honest reflection on method and limits. The voice is credible and unshowy. Main gaps: the closing paragraph leans on generic skill claims, and the collaborative paragraph could connect more explicitly to your MSc aims.

Subject motivation

corrosion problems are usually a combination of material choice, geometry and environment

Your motivation grows from a concrete fastener problem rather than abstract fascination, and you draw a genuine insight from it. Admitting the analysis was not sophisticated strengthens rather than weakens this, because it explains exactly why you want formal study instead of guesswork.

Academic preparation

compared the pitting behaviour of 304 and 316 stainless steel

Named modules and a specific final-year project with real techniques, such as potentiodynamic scans and metastable transients, show appropriate first-degree preparation. Stating that the results matched the literature is honest; your emphasis on reproducibility and scatter shows you understand what the project actually taught you.

Evidence and reflection

our first independent counts of the same image differed by nearly a third

This is excellent reflective evidence: a precise, small discovery that leads to a real methodological lesson about measurement versus impression. You could briefly say what convention you agreed, so the reader sees how you resolved the discrepancy, not just that you noticed it.

Relevant experience

edges and bolt heads where film thickness is always thin

Both the technician role and the canal volunteering are ordinary but highly relevant, and you link them to concepts like differential aeration. The edge and fastener observations recur convincingly in your dissertation interest, giving the experience a coherent purpose rather than listing activities.

Credibility and voice

I cannot claim the analysis was sophisticated

Your measured tone and candid statements of limits, including calling your knowledge patchy, read as plausible for a graduate technician. Claims are proportionate: complaints reduced, results were broadly predicted. The final sentence slips into generic self-description that is less convincing than the rest.

Structure and format

An MSc attracts me because my current knowledge is patchy.

The sequence of origin, degree, collaboration, volunteering, gaps and aims is logical and economical. The collaboration paragraph sits slightly apart from the narrative, and the conclusion ends on transferable skills rather than returning to your intellectual direction, which weakens the final impression.

What you’ve done well

  • You specify knowledge gaps such as cathodic protection design and inspection regimes, showing realistic readiness for a taught MSc.
  • Your dissertation interest in coating breakdown at edges and fasteners is tractable and directly traced to repeated first-hand observation.

How this draft could improve

  • Replace the closing list of skills with a sentence linking your aims in asset integrity back to evidence already shown, such as the fastener investigation.
  • Connect the pit-counting paragraph explicitly to your stated wish to strengthen modelling and data analysis.
  • For a real application, tailor the gaps you name to the actual programme's content without inventing details.